|
Interacting w/ the Field
Posted by Dan.
Student on team #10, BSM, from Benilde-St. Margaret's and Banner Engineering.
Posted on 1/18/2000 4:37 PM MST
So far FIRST has made it very clear that robots can not be designed to interact with the field.
I interpret this to mean that your robot cannot be dependent on the field to perform a function.
But let's say that when a team drops balls in the trough they butt up against the trough just to make sure their balls will drop properly--and besides it's quicker to just run into the trough instead of slowing down beforehand.
Let's also say that this robot could perform this function without the field there (ie a robot could still line itself up with the trough without running into it.)
Is this a case of a team improperly interacting with the field or just some healthy nudging?
I'm really not going to like this problem if the answer to this question is 'No.'
:-Dan
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|
FIRST for me is getting to opportunity to learn from the smartest people I know, the mentors. - faust1706 [more] 
Similar Threads
Threaded Mode