|
|
|
 This 6 weeks of work, sweat, thinking, designing, building, talking, discussing, turning wrenches, wiring, programming, drawing on chalk boards, eating pizza, drinking mountain dew, with the students - is what the FIRST experience is really about. - meaubry [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
24-01-2008, 21:36
|
|||||
|
|||||
|
Re: mounting accelerometers & gyros
Certainly non-conductive materials!
In the past we have mounted gyros and accelerometers with screws and nuts onto a thin (<1/16") metal plate, with a thin (1/8") piece of hobby foam sandwiched underneath. The screws were not too tight (so the solder points below didn't punch through the foam), then we used blue thread-locker to make sure it stayed. The metal plates were then mounted to the robot frame as necessary. Don |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gyros | EROCK | Kit & Additional Hardware | 10 | 21-01-2008 18:58 |
| Where to get the KOP accelerometers? | Billfred | Kit & Additional Hardware | 0 | 19-11-2005 10:15 |
| The accelerometers | Validius | Programming | 9 | 21-03-2005 08:22 |
| pic: The Bobcats 2001 & 2003 & Admirers | CD47-Bot | Robot Showcase | 19 | 28-02-2004 12:36 |
| Gyros!! | RAWdealer59 | Programming | 1 | 12-02-2003 16:46 |
Threaded Mode