|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
|
||||
|
||||
|
Re: Lights on Spikes and Vics
Correct me if I'm wrong…
For the Victors: Solid Orange - receiving a neutral PWM signal (127) Blinking Orange - receiving no signal (i.e., disconnected, robot controller in program mode, or dongle in Disable position) Green - Full (or close to) forward Red - Full (or close to) reverse Off - between 127 and full forwards or between 127 and full reverse For the Spikes: Solid Orange - neutral, receiving power Green - forwards (V+ connected to M+, V- connected to M-) Red - backwards (V+ connected to M-, V- connected to M+) Off - not receiving power OR both on (only useful if using a Spike for multiple solenoids: V+ connected to both M+ and M-) Definitely pay attention to the lights on the Victors, as they can help you diagnose problems like bad PWM cables and incorrect connections. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| victors spikes and pwm cables | sburro | Electrical | 3 | 23-02-2005 02:24 |
| Motors and Victors/Spikes | anna~marie | Electrical | 4 | 01-10-2004 21:58 |
| Extra Speed Contrls and Spikes On Bot? | Joe Matt | Electrical | 4 | 13-02-2004 20:25 |
| spikes and victors | VinceT | Electrical | 2 | 14-01-2004 01:36 |
| extra victors and spikes allowed? | gail | OCCRA | 12 | 13-11-2002 14:17 |