pic: Taigene

Nuttyman54 · #1 26-01-2008, 16:29

The specs for the 2008 Van Door Motor (Taigene) are here. This is the Van Door motor, not the window motor.

Nuttyman54 · #2 27-01-2008, 22:20

Quote:

Originally Posted by Nuttyman54

The specs for the 2008 Van Door Motor (Taigene) are here. This is the Van Door motor, not the window motor.

Apparently the link no longer works. If you search for 2008 Motor Data you should find a thread about it.

STEMiscool · #3 06-01-2015, 11:11

We are interseted in using the taigene vandor motor for a forklift pulley system on our robot this year. We need to know if it is compatiable with a motor talon or victor motor controller or should we use a cim with a gearbox.

Al Skierkiewicz · #4 06-01-2015, 11:34

Any controller can be used to power this motor. Controllers and motors are not limited except as listed in Table 4-4.
However, I would caution users that wish to run two of these motors on a single relay.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: Panoramic Pic from Nationals 2001	CD47-Bot	Extra Discussion	19	23-03-2004 23:38
pic: pic 1	CD47-Bot	Robot Showcase	6	22-02-2004 00:29
pic: Another pic of Team 930	CD47-Bot	Robot Showcase	7	25-02-2003 21:07