|
|
|
 Engineering is NOT manufacturing. .... It is good to be able to fabricate things with your own hands, but thats not what engineers do. - KenWittlief [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Engineering is NOT manufacturing. .... It is good to be able to fabricate things with your own hands, but thats not what engineers do. - KenWittlief [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
CIM Motor Bias Direction
CIM Motor Bias Direction
Does anyone know which direction the CIM motor runs fastest CW or CCW given the same load and driving voltage? TNX for the help. |
|
#2
28-01-2008, 07:58
|
||||
|
||||
|
Re: CIM Motor Bias Direction
The FP801-001 drawings shows the motor spinning in a Counter Clock Wise (CCW) direction as it's "forward" rotation. This is consistant with the bias testing we did over the weekend.
Bengineer |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| your thoughts on the FP CIM/2.5 CIM motor drive setup versus 2 2.5 CIM motors | waialua359 | Motors | 11 | 14-12-2007 04:29 |
| Charts/Data on FRC Motor and Joystick Bias | NeilS | Technical Discussion | 1 | 04-01-2007 13:48 |
| Motor Bias | gshosford | Motors | 27 | 10-02-2006 01:35 |
| Large CIM Motor Bias | Ceal Craig | Motors | 3 | 09-02-2006 10:20 |
| Motor Spin Direction | archiver | 2000 | 6 | 23-06-2002 23:43 |
Linear Mode
