<h1>FRC=Trouble!!</h1>

[Donny_Fresh]

Man...our team was so close to being perfect and now we've been faced with several new problems:

1: The Rotary Valve broke off the robots hollister belt.
2: The telecom 3000 E series that was included in our deluxe KOP was thought to be broken, but it actually just needed new batteries, but we soon learned that the spindle charges on the telecom would snap in half.
3: The shaft output valve that we purchased to increase speed using pnuematical parameters only runs at 90 psi which is illegal in the game.
4: The Flux Mcdocizer will only run when charged at 900volts which anyone reading this would know is too power to harness under F12 protocol which forbids the use of more that 20ohms per instant use.
5: We purchased a 70/10 which is a cheaper version of the 80/20 which actually works a lot better in our opinion just because is was manufactured to percisly glide with the precision of a double mono count sproketor. The only problem is that its made of a poly carbon ion which fused with a special quartzite that we used to frame the body will produce a semi titanium oxy magnesium which has a net fg of about 230newtons or 347lbs for those of you using the english system.
6: And finally our mascot is going to be Europe duing the competition so who are we gonna get now??

so yea those are our problems. If anyone knows how we can get these things to work please comment. also tell us how your doing!!