Player Station Measurements

leobot_792 · #1 02-02-2008, 10:01

We've been checking the manual all over and can't find the required measurements for the robot control carrier that goes in the player's station. It would be very helpful if someone could clear it up for us. Thanks

MrForbes · #2 02-02-2008, 10:12

Did you find the measurements for the shelf that it must sit on? That is the only real requirement...it has to fit on the shelf. From memory, the shelf is 4 feet wide and one foot deep, and has a strip of velcro running down the center for your console to stick to.

Andy L · #3 02-02-2008, 23:47

Quote:

Originally Posted by squirrel

and has a strip of velcro running down the center for your console to stick to.

I looked through the rules and things but I couldn't fidn where it says what side of the velcro is on the shelf. does anyone know?

EricH · #4 02-02-2008, 23:54

Quote:

Originally Posted by Andy L

I looked through the rules and things but I couldn't fidn where it says what side of the velcro is on the shelf. does anyone know?

Section 6.4.2 says it's loop side.

Oh, and Squirrel: it's 5' (60") wide. The Velcro is 4.5' x 2".

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Player station question...	E Jones 234	Rules/Strategy	11	26-02-2005 02:37
PDA's in the player station?	crispyc	Rules/Strategy	10	17-02-2003 02:18
Player Station Question...	archiver	2000	1	23-06-2002 23:10
Player Station	archiver	2001	2	23-06-2002 22:36
Player Station Signs	kmcclary	Off-Season Events	0	16-11-2001 22:52