pic: 816's First Teaser

thefro526 · #1 02-02-2008, 16:32

lopz056 · #2 02-02-2008, 16:33

nice forklift system, is there anything securing the top of the ball or is it kind of just sitting there?

thefro526 · #3 02-02-2008, 16:58

the picture is actually partially staged the ball isn't in the fully held position the forks actually pivot back to cradle the ball against the lifter. there was an upper arm that would help us hold the ball tighter but we took it off this morning because it was deemed unnecessary and a mentor and i broke it while driving

lopz056 · #4 02-02-2008, 17:51

so did you deem it unnecessary, or did you break it? or did breaking it help you come to the conclusion that it was unnecessary?

thefro526 · #5 02-02-2008, 17:55

Ummm we found out we didn't need it last night and didn't take it off but kept it to try in auto. And as the mentor and I staged the autonomous/hybrid, we pushed it into the ball to try to knock it off and we hit it a bit to hard and bent the piston so we just took it off. Like I said more pics will be up later

thefro526 · #6 02-02-2008, 19:56

check the real bot at: http://www.chiefdelphi.com/forums/sh...947#post690947

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: Team 1660's first teaser	bigboi146	Robot Showcase	12	14-02-2007 18:46
pic: Teaser	CD47-Bot	Robot Showcase	6	03-03-2004 12:39
pic: Team 1053's very first ever teaser pic	CD47-Bot	Robot Showcase	3	16-02-2004 22:56
pic: Team 782 teaser pic	CD47-Bot	Extra Discussion	2	15-02-2004 23:53
pic: 111 Teaser (tiny teaser)	CD47-Bot	Robot Showcase	15	04-03-2003 00:49