field

[Vikesrock]

In the 27' direction (width) it is 13' 5.75" as noted in the drawing. in the 54' direction (length) it is approximately the same. If you build the lane divider according to the specs in the other documents and place the center of the lane divider at the center of the lane divider at the center of the long dimension (27' in on the 54' dimension), then the tape runs from the wall of the driver station to the lane divider.

[elvin23]

can you brake it down like a fraction

[Vikesrock]

In the 27' it is right in the middle (1/2). In the long direction (54'), it goes

Tape (1/4)
Divider (1/2)
Tape (1/4)