xbox controller

[borabora]

I understand the different modes, but each mode does not include every button and analog stick there is.
For our drive train we need them all. Is there any way i can use them all?

[Alan Anderson]

A joystick port has four analog inputs and four switch inputs. The Chicklet can repurpose analog inputs to encode four more switches. So far as I can tell, supporting more than two analogs and twelve switches simultaneously is simply not possible. It's a hardware limitation of the OI's joystick ports.

[borabora]

what if we were to take out one of the analog wires and wire them to another com port?

Would it then be possible to use everything on that xbox controller?

[Alan Anderson]

Originally Posted by borabora

what if we were to take out one of the analog wires and wire them to another com port?

Take out one of what analog wires? Take it out from where?

Wire them to what other com port? And what "them" are you talking about?

I don't understand the question.

If you're talking about gutting the controller and wiring it directly to the OI, it could work, but I think the xbox controler's innards are not very easy to connect to. The analog controllers in particular are a very poor match for what the OI joystick inputs expect.

[borabora]

Sorry for the sloppy question.

But you still understood correctly. We opened up an xbox controller today and saw how the analog is wired and compared it to the joysticks first provides. It seems like exactly the same thing, but on a smaller scale.

I guess we will try to connect them and see if it works. I was wondering if it was possible and i guess it is. We will test the "poor match."

Ill put up the results once we are done.

Thanks.