Gyro Implementation

Guarana · #1 07-02-2008, 00:17

But step 3 in the adc installation says:

3) On the EDU-RC, all analog inputs must be configured as
INPUTs in user_routines.c/User_Initialization().

That is what I did right?

Kevin Watson · #2 07-02-2008, 01:23

Quote:

Originally Posted by Guarana

But step 3 in the adc installation says:

3) On the EDU-RC, all analog inputs must be configured as
INPUTs in user_routines.c/User_Initialization().

That is what I did right?

Are you using the small EDU robot controller or the full size FRC robot controller?

-Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gyro	captainking	General Forum	4	03-02-2008 22:25
[FVC]: Gyro?	Tangello_angela	FIRST Tech Challenge	1	23-02-2007 18:20
Gyro	magical hands	Programming	2	14-01-2005 20:57
gyro	odin892	Programming	0	08-04-2003 09:59
Gyro	archiver	2001	2	23-06-2002 23:11