DeWalt Transmissions and Globe Motors

[Kilroy0846]

Our team just got a hold of a couple DeWalt Transmissions. Following the Nothing But DeWalt white paper by Joe P. we began the assembly. We have run into a problem very quickly in step 3 of the globe motor process. It talks about a "modified pinion gear from the extra transmission (.138 inch +0.0000" -0.0005" hole)". This is meaningless to me and the rest of our team. I have searched the entire white paper and found nothing about a modified pinion gear. Has anyone had this problem? What is a modified pinion gear, and where can I find one?

Thanks for the help.

[Kilroy0846]

Never mind, I found it.

For the Fisher Price and the Globe motor interface you will need pinion gears for Sun1. The Dewalt
transmission will provide us a ready source of gears for Sun1. If you buy one extra transmission, you get
four Sun1s for modification from the Planet2 stage. If you make several Dewalt transmissions that require
this sun gear (2 Fisher Price and 2 Globe for example), you only need to purchase 1 extra transmission
for every 4 assemblies. So, in this Dewalt Bill of Material, I will add an extra transmission.