The Bumpers

latonya · #1 07-02-2008, 17:09

Does anyone knows a quick and easy way to bumpers on

EricH · #2 07-02-2008, 17:20

Bolt and wing nut, maybe?

billbo911 · #3 07-02-2008, 17:23

Quote:

Originally Posted by latonya

Does anyone knows a quick and easy way to bumpers on

If you intend to follow the rules, then there is only one way, bolts.
Please read the rules for bumped design specifications.

<R08> "...STANDARD BUMPERS must be constructed as described below.... STANDARD BUMPERS must be
attached to the ROBOT with a boltand-
fastener system to form a
rigid, robust connection to the
ROBOT structure..."

jhaugen · #4 07-02-2008, 17:43

We used bolts with lock nuts so they won't come off during competition.

iwashere1990 · #5 07-02-2008, 20:55

Quote:

Originally Posted by jhaugen

We used bolts with lock nuts so they won't come off during competition.

Do you have problems fitting into the box for inspection?

I would use bolts, assuming your pit will have a wrench.

Good luck

comphappy · #6 07-02-2008, 21:03

What if they are magic bolts?

synth3tk · #7 07-02-2008, 21:45

Quote:

Originally Posted by iwashere1990

Do you have problems fitting into the box for inspection?

I would use bolts, assuming your pit will have a wrench.

Good luck

Uhm, didn't the post state that they're using bolts? With lock nuts. Or maybe I'm missing something here...

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quick question about the bumpers	iPilipino	General Forum	3	23-01-2008 18:05
can we use the cloth for bumpers?	strawberymochi	Technical Discussion	2	01-02-2007 22:19
Question about the bumpers.	Brad Voracek	Technical Discussion	16	16-01-2007 07:28
Bumpers & the Ramp	Gary Bonner	Rules/Strategy	2	26-01-2006 11:13
Enough with the bumpers!	archiver	2000	2	23-06-2002 22:32