|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Cim/planetary gearbox torque??
Can anybody tell me what the torque output for the CIM/planetary gearbox is?
Thanks Bruce |
|
#2
|
|||||
|
|||||
|
Re: Cim/planetary gearbox torque??
It should be the motor torque times the gear ratio. For example, if the motor puts out 80 Oz-In torque at 20% load, and your gearbox is 10:1 reduction, then it will give a final torque of 800 Oz-In. Less gearbox losses, of course...which will reduce it by about 15% as a guess.
|
|
#3
|
||||
|
||||
|
Re: Cim/planetary gearbox torque??
o.k. so what is the torque of the CIM?
Bruce |
|
#4
|
|||||
|
|||||
|
Re: Cim/planetary gearbox torque??
read this thread
http://www.chiefdelphi.com/forums/sh...ad.php?t=59828 it offers a good explanation of what you're looking for...as well as the number 343 Oz-In. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| AndyMark CIM Planetary Gearbox Torque Specs Needed | KTorak | Technical Discussion | 4 | 17-01-2008 18:53 |
| CIM motor gearbox | tseres | Motors | 3 | 22-05-2007 22:31 |
| Planetary Gearbox Possibility? | ThatIndianKid89 | Technical Discussion | 4 | 04-02-2007 17:18 |
| Torque vs. Current in small CIM motors | robotguru1717 | Electrical | 2 | 08-01-2007 17:09 |
| Low Cost Planetary Gearbox Source... | Joe Johnson | Motors | 32 | 14-11-2006 18:02 |