accelerometers and gyroscope to control arm?

[Lil' Lavery]

Originally Posted by Hazmatt

We have been trying to mount a pot on the arm for a long time, and are finding it nearly impossible. I think we are going to have to go with the potentiometer though, after just realizing that the accelerometer is going to measure the acceleration of the entire robot also, if I set it up this way.

If you can't mount a potentiometer on the actual rotation point on the arm there are other solutions. One would be mounting a shaft encoder somewhere else, and running a cable from it to the arm. As the arm moves, it will pull the cable and turn the encoder (essentially a spool or an inverse winch). You can then translate the rotations of the encoder into distance travelled into rotations of the arm.

[Hazmatt]

Originally Posted by Lil' Lavery

If you can't mount a potentiometer on the actual rotation point on the arm there are other solutions. One would be mounting a shaft encoder somewhere else, and running a cable from it to the arm. As the arm moves, it will pull the cable and turn the encoder (essentially a spool or an inverse winch). You can then translate the rotations of the encoder into distance travelled into rotations of the arm.

Where can we get one of these encoders? Can't encoders only measure distance traveled, or can they measure direction also?

[GUI]

Quadrature shaft encoders can measure direction as well as distance. There are many suppliers for shaft encoders, pretty much any large electronics supplier will carry them, as well as some specialty companies.

[cjtenny]

Hey,

I suggest using an accel & gyro so as to correct for the linear acceleration. Kinda like we did on the DIY Segway (http://web.mit.edu/first/segway/)... You can even view our code.

Then again it might not work as well for this.

It's like as Kevin suggested:

It's more work, but you could use another accelerometer pair mounted perpendicular to the gravity vector to measure the 'bots acceleration due to movement and then use this information to correct the arms position.

-Kevin

But since they don't give you two accelerometers, and they do give you 1 accel & 1 gyro... it's more KOP-compatible.

Although if anybody has an extra gyro, we need one, ours is broken and we want to use it. Just a heads up, as we've already posted in CD-swap. We can probably trade our accel for your gyro if you wanna do the 2-accel method.

[windell747]

Why not use an absolute or even an incremental encoder to monitor the position of the arm? Actually, the potentiometer might be the simplest idea, but since I didn't see anything about an eoncoder...decided to mention it. On the other hand, if you're using ferrous metal gears on your arm you could use the GTSs too!