|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Need a quick answer about grabber....
As far as I know, the dreaded Rule 16 is the only one that applies
"<R16> Once the MATCH has started, the ROBOT may assume a PLAYING CONFIGURATION that exceeds the size dimensions specified in Rule <R11>. While in the PLAYING CONFIGURATION, the ROBOT may expand up to a maximum horizontal dimension of 80 inches (e.g. all parts of the ROBOT must fit within an imaginary 80-inch-diameter upright cylinder). There are no height limits for a ROBOT in its PLAYING CONFIGURATION at any time after the start of the MATCH. " |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need an answer super quick, keyang motors!!! | R.C. | Motors | 8 | 16-02-2008 18:40 |
| Need a quick answer!!!! | latonya | Motors | 1 | 09-02-2008 18:22 |
| MOTOR TROUBLE!! NEED AN ASAP ANSWER!! | psycho7 | Motors | 4 | 12-02-2006 14:58 |
| I NEED AN ANSWER!!! EVERYONE READ! | archiver | 2001 | 2 | 24-06-2002 01:01 |