|
|
|
 Because nothing says safety like carrying a 150lb robot across a field covered in golf balls. - Kevin Sevcik [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Because nothing says safety like carrying a 150lb robot across a field covered in golf balls. - Kevin Sevcik [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#8
13-02-2008, 10:18
|
|||||
|
|||||
|
Re: Victor Problems
Justin,
Although the change in color is not explained by what I am about to tell you, remember that the motor itself has a thermal cutout internal to the motor. The next step is to place a VOM on the input terminals of the Victor to insure you have a solid 12 volts at this point when the motor is under load. I would also try running the default code for that motor (all others disabled) and see if in fact the code has a problem. I believe the LED is telling you that the PWM is changing but I don't know how the Victor reacts to bad power under load. The best method to find the problem is to eliminate all the variables. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems with victor blowing | JamesBrown | Electrical | 18 | 17-02-2008 20:36 |
| Victor 884 Problems | Team 135 | Electrical | 12 | 05-02-2008 13:24 |
| Labview problems and code problems | ajsetter | Programming | 25 | 18-01-2006 17:07 |
| Victor 884's not behaving the same as Victor 883's | programmer1 | Programming | 13 | 10-03-2004 21:51 |
| Victor problems | quickie25 | General Forum | 2 | 18-02-2004 19:51 |
Threaded Mode