|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Retrieving Code
Hello, I was curious if there was anyway to pull code off the RC? Or if anyone has a program they made that can do it??\
Thanks in advance, POPO |
|
#2
|
|||
|
|||
|
Re: Retrieving Code
Check the IFI site, there is a tool.
However, you're only gonna get (at best) a functional binary, you won't be able to get the source. |
|
#3
|
|||
|
|||
|
Re: Retrieving Code
Felix is correct. You can get the hex file back off of it using a tool from IFI, but that won't get you the C source that was used to make it. You might be able to get a disassembler for that code, but that will still only get you PIC18F assembler code.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems Combining Camera Code and Driving Code | cmurdoch | Programming | 20 | 10-02-2007 16:34 |
| Problems integrating CMUCAM code and IFI Default Code | Windward | Programming | 2 | 06-02-2007 16:48 |
| problems using gyro/adc code with camera default code | tanstaafl | Programming | 7 | 22-01-2006 23:09 |
| Team THRUST - Kevin's Code and Camera Code Combine | Chris_Elston | Programming | 3 | 31-01-2005 22:28 |
| WRRF Code wrapper for Innovation FIRST Code | FotoPlasma | Programming | 0 | 02-02-2004 19:28 |