CIMs?

fishgurl · #1 15-02-2008, 16:17

Anyone know how many CIMs are allowed on the robot? I couldn't find it in the rules/manual.
Thanks

EricH · #2 15-02-2008, 16:19

Quote:

Originally Posted by fishgurl

Anyone know how many CIMs are allowed on the robot? I couldn't find it in the rules/manual.
Thanks

Small CIMs<=4. See Section 8, the subsection on motors and actuators. It's quite blatant--something about up to two CIMs that weren't provided in the KOP, and no more.

Joe Ross · #3 15-02-2008, 16:21

See <R59>

Al Skierkiewicz · #4 15-02-2008, 17:47

<R59> Additional motors specifically permitted on 2008 FRC ROBOTS include:
 All motors, actuators, and servos provided in the 2008 Kit Of Parts,
 HITEC HS-322HD servos,
 FIRST Tech Challenge (FTC) servos (Innovation First part number 276-2162),
 FIRST Tech Challenge (FTC) motors (Innovation First part number 276-2163),
 One or two additional 2-1/2” CIM motors (part #FR801-001 and/or M4-R0062-12 in addition
to those provided in the Kit Of Parts. This means that up to four, and no more, 2-1/2” CIM
motors can be used on the ROBOT.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CIMs	brennerator	Motors	10	26-01-2007 10:22
2 CIMs -- practical?	Joe G.	Motors	15	23-01-2007 15:32
Inductance of CIMs	phrontist	Electrical	13	06-01-2006 09:17
Modifying CIMs to implode?	dlavery	Motors	44	13-02-2005 11:51
Drill+CIMs	kevin.li.rit	Motors	2	10-01-2004 16:29