LED Flasher connection

itsme · #1 16-02-2008, 15:56

To where do I connect the 4 wire connector in order to make the LED flasher work?

DonRotolo · #2 16-02-2008, 16:17

Read the manual, it is explained there.

On the RC there are connectors just for that, look for it.

DarkJedi613 · #3 16-02-2008, 16:35

Quote:

Originally Posted by Don Rotolo

Read the manual, it is explained there.

On the RC there are connectors just for that, look for it.

To be a bit more specific, it plugs into the "Team Color" outputs on the RC.

itsme · #4 16-02-2008, 16:46

Thanks!

dani190 · #5 17-02-2008, 15:39

Quote:

Originally Posted by itsme

Thanks!

Were do i find that? im still unable to find that plug myself

Josh Hambright · #6 17-02-2008, 16:00

Check out this file from IFI's website:
http://ifirobotics.com/docs/rc-ref-guide-6-13-2006.pdf

Look on page 2 right under the table of contents has a diagram showing all the connections. The color connectors are at the top of the board next to the PWM connectors.

Page 10 of that document contains more helpful info about the Team Color outputs.

Hope that helps.

dani190 · #7 18-02-2008, 09:33

wow im out of it thanks for that but i ended up finding it. It was printed on the black board its self in big letters.

Maybe i need some sleep?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
flasher help	jfrank	Electrical	5	20-02-2008 18:42
LED Flasher	mcf747	Electrical	2	11-02-2008 10:46
2008 LED Flasher installation instructions?	Japper	Electrical	3	13-01-2008 12:00
led flasher	team1203 4life	Kit & Additional Hardware	8	12-01-2008 15:54