question about lexan

Matt C · #1 18-02-2008, 16:47

So if you made new panels, installed them in the robot prior to shipping, and brought the old ones (assuming all fabrication was done prior to ship) as replacements, they wouldn't be legal? Also assuming they are under 25 pounds. Depending on the complexity of these sides, they could be straight plates mounted vertically that have the sole purpose of displaying their team's name, number, and sponsor.

EricH · #2 18-02-2008, 17:42

Quote:

Originally Posted by Matt C

So if you made new panels, installed them in the robot prior to shipping, and brought the old ones (assuming all fabrication was done prior to ship) as replacements, they wouldn't be legal? Also assuming they are under 25 pounds. Depending on the complexity of these sides, they could be straight plates mounted vertically that have the sole purpose of displaying their team's name, number, and sponsor.

They would be legal. HOWEVER, all work would need to be done before ship or during a Fix-it window.

GaryVoshol · #3 18-02-2008, 18:06

My previous answer was wrong. See http://forums.usfirst.org/showthread.php?t=8797

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about a controller.	seanl	Technical Discussion	1	12-01-2008 15:05
A question about current....	Adam Y.	Electrical	41	26-11-2004 21:46
Question about groups	Mike Ciance	Chit-Chat	1	14-06-2004 12:50
Question about transmitters	Nick Fury	Control System	3	05-04-2004 15:26
question about contacts	robot180	Chit-Chat	37	27-09-2003 22:40