|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: weight problems anyone?
We have been brain storming as to how to lighten the bot. We've got a big list on the whiteboard. We even get as specific as removing xx bolt, etc etc. It's amazing when you look at the robot and think "but we can't TAKE any more out".... then someone comes up with some way to shave off another .5 kilogram.
|
|
#2
|
|||||
|
|||||
|
Re: weight problems anyone?
Last year we were about 12 pounds over and the captian gave everyone a drill and said "Start drilling my friends" This is the first year out of 5 that we are under 4 pounds. We used cad and 3ds max to calculate how much our bot would weigh.
|
|
#3
|
||||
|
||||
|
Our robot weighs 128 lbs with the battery and the bumpers attached, so we should be around ten pounds under weight.
![]() |
|
#4
|
||||
|
||||
|
Re: weight problems anyone?
we weighed our piece midway through the season and It came out something like
base: 60 lbs forklift: 30 lbs manipulator: 8 lbs we figured we were fine until the friday before ship where we weighed it at a veterinarian's office on a dog scale to find 12 lbs overweight. The next day we had one person with a 1/4 in. drill bit, one with a 1/2 in drill bit, and another with a 27/32 in. drill bit going in a line down the sides of our forklift. We also started drilling into our frame because we figured 80/20 is strong enough to take a few holes in it. we didn't get to weigh it after we started drilling holes so we're still a little scared about our weight and have a few people brainstorming ideas. |
|
#5
|
||||
|
||||
|
Re: weight problems anyone?
Like the others have said most teams drill holes on stable parts but don't make it unstable.
|
|
#6
|
||||
|
||||
|
Re: weight problems anyone?
Isn't there another thread about Robot weight this year? Anyway,
Last edited by Blue_Mist : 23-02-2008 at 23:02. Reason: Correct the weight |
|
#7
|
|||
|
|||
|
Re: weight problems anyone?
We were a few pounds over but after we did the final run through of final parts needed on the bot we were actually a few under. The problem is, it seems that our bot gains a few pounds in the crate. Maybe a miscalibrated scale
![]() |
|
#8
|
||||
|
||||
|
Re: weight problems anyone?
As a matter of fact I DO have to lose a few pounds..........
Oh, sorry, you mean the ROBOT. We still have room for a McDonald's Quarter Pounder, as long as it's without cheese. |
|
#9
|
||||
|
||||
|
Re: weight problems anyone?
we were 12 pounds underweight (we weighed 119.6 with the battery on)
|
|
#10
|
||||
|
||||
|
Re: weight problems anyone?
we are 22 lbs underweight, but we added 18 lbs of weight to help tipping problems.
Much better then last year, where we where 8lbs over weight. |
|
#11
|
||||
|
||||
|
Re: weight problems anyone?
our robot weighs 67.3 lbs (30.5267665 kilograms) before bumpers and battery, and a little over 87 with everything on it...let me just say we're really confused about it
|
|
#12
|
||||
|
||||
|
Re: weight problems anyone?
We actually came right into 120lbs!
That almost never happens ![]() |
|
#13
|
||||
|
||||
|
Re: weight problems anyone?
well we were like 50 pounds... under weight or a little more not sure but still had a lot of room for more weight.
|
|
#14
|
||||
|
||||
|
Re: weight problems anyone?
The sunday before ship date, Fondy Fire was at 135 lbs. That day we removed enough unvital metal so that we are now at 113 lbs and are able to attach nicer body panels! It was a close one!
-Fondy Fire |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Weight? Estmate weight? | Arkorobotics | General Forum | 21 | 29-01-2007 17:34 |
| Wait...weight...weight!!!! | Greg Perkins | General Forum | 3 | 22-02-2006 07:42 |
| Anyone Else Having Problems with Q&A on FIRST? | Windwarrior | General Forum | 6 | 25-01-2006 10:54 |
| Does anyone else forsee redesign problems? | Jon K. | Website Design/Showcase | 2 | 18-12-2004 18:02 |
| DOES ANYONE HAVE PNUEMATIC RELAY PROBLEMS? | archiver | 2001 | 0 | 24-06-2002 00:30 |