pic: Team 34 - Differential

[Ed Sparks]

Originally Posted by psyco_klown

Very nice! Whats the part number for those spiral gears. Those look perfect for a differential project im working on.

This design uses:
(2) LSA110Y-R (Right Hand Spiral)
(2) LSA110Y-L (Left Hand Spiral)

Both are 18 tooth, 18 DP spiral bevel gears.

[techtiger1]

Mr.Sparks as a fan of drive systems, I am quite impressed with what you have done here looks great. Will 34 be attending the Palmetto if so I will take a look at it there if not Championships for sure. Good luck this year.

-Drew

[Aren_Hill]

should've taken it one step further with 4wd, then maybe 1 step past that with 4wd 4wheel steering

i wonder if anyone this year is upscaling and high performance rc car 4wd and full independent suspension, that would be awesome to watch drive.

i love the limited slip differential

[Ed Sparks]

Originally Posted by techtiger1

Mr.Sparks as a fan of drive systems, I am quite impressed with what you have done here looks great. Will 34 be attending the Palmetto if so I will take a look at it there if not Championships for sure. Good luck this year.

-Drew

Unfortunately, we will not be at Palmetto this year. We are attending Peachtree and Bayou.

[MrForbes]

How difficult would it have been to integrate the clutch plates into the diff housing, like in a normal automotive limited slip rearend? Seems like a lot of extra hardware there....

(when we were considering Ackermann steering, we were planning on using a software differential)

[Ed Sparks]

Originally Posted by squirrel

How difficult would it have been to integrate the clutch plates into the diff housing, like in a normal automotive limited slip rearend? Seems like a lot of extra hardware there....

(when we were considering Ackermann steering, we were planning on using a software differential)

I'll probably work on this during the off season. This was a simple way to go given the time constraint and limited resources.