Placement of Nasa Logo on shirt?

[jgannon]

Originally Posted by Cory

I'm not aware of any guidelines or rules regarding placement of the logo.

I'm not either, but back when we were a NASA grant team, we had the logo on our sleeve. I seem to remember that it cost more to do it that way, but the reason we did was because somebody said we had to. I don't have any paperwork on-hand to back this up, but at the very least, it seems to be a strangely pervasive rumor.

[Sunshine]

Do some searching around the NASA site at: http://www.hq.nasa.gov/office/pao/insignia/ and you will get your answer. They were particular about how the NASA logo looks as they should be.

[Coach Norm]

Team 2468 qualified for a Program Growth Grant. Below is information from Catherine Bowman from NASA concerning logos. It is not required on your t-shirt but required on your robot and in your team name on TIMS.

5. It is a FIRST requirement to include sponsor logos on the robots. For your use when satisfying this requirement, an electronic copy of the NASA logo artwork is attached. The logo is attached as a .pdf file, which should make it fairly easy to enlarge as needed. Usage guidelines for the logo
artwork are available on-line at http://history.nasa.gov/meatball.htm along with additional versions of the logo artwork.

6. Teams are encouraged to include the NASA logo on team t-shirts. Proper
placement of the logo is either above the left breast pocket (or in a
similar location if the shirt does not have pockets), or on the left sleeve
of the shirt located at mid-bicep. In either case, the team name should appear immediately below the logo.

7. It is a FIRST requirement to include the names of all sponsors in the
official team name recorded in TIMS. As a recipient of a NASA grant, NASA
becomes one of the sponsors of your team and is to be included in the
official team name. FIRST will update your TIMS information automatically
to include this addition - you don't have to do anything further.

Hope this helps.

[Cory]

Originally Posted by Sunshine

Do some searching around the NASA site at: http://www.hq.nasa.gov/office/pao/insignia/ and you will get your answer. They were particular about how the NASA logo looks as they should be.

Unless I missed the part you're referring to in there, that link is rather unhelpful for FRC purposes. Nobody will be using the NASA logo, or center/project logos.

[Coach Norm]

Originally Posted by Cory

Unless I missed the part you're referring to in there, that link is rather unhelpful for FRC purposes. Nobody will be using the NASA logo, or center/project logos.

I was just copying and pasting the information about the logo placement from an email I received from Catherine Bowman at NASA. I copied the portion of the email referencing the logo placement on the shirt and robot.

[JaneYoung]

Originally Posted by Coach Norm

I was just copying and pasting the information about the logo placement from an email I received from Catherine Bowman at NASA. I copied the portion of the email referencing the logo placement on the shirt and robot.

Coach,
I think Cory was referring to the link that Sunshine included in his post, I don't think he was referring to yours.

I never knew the logo was referred to as the NASA meatball. That's awesome.