New C18 3.0+ Compatible FRC Code

[Manoel]

Originally Posted by gwt8641

Can anyone confirm that this code works when interfaced to the competition control?

I ran this code, compiled with the 3.0 compiler, with no issues prior to competition. During our first practice match at the Finger Lakes competition, the "code error" light came on and we have encountered a number of very strange issues with our team's RC since. These malfunctions disappear for a short while after reloading the "master code", but keep coming back.

Any ideas? It very well might not even be related to Kevin's libraries... but the default .hex file from IFI seems to work, so I'm stumped. I can't even find a 2.4 version of the compiler, so I hope to make this work.

Thanks!

I've had the exact same problem you described, except I was using a competition dongle (practice time at home). The problem only happened three times, two with the flashing code error light. The other time, code error turned on steady and only a cold boot would fix it (resetting didn't do a thing).

The problem appeared to happen when we clicked the "set arm position" button, but all that does is change a variable's value, the function that sets it gets called every slow loop regardless of a button press. I couldn't replicate the problem in any way, I just noticed that it coincidentally happened when we pressed one of those buttons.

There's nothing too slow in my code (absolutely no for/while loops, only a few printfs, two 8 CPR home-made encoders and two analog channels reading - that's the heaviest section) and most of it is standard Kevin code. My "fix" to the steady code error light was a Master processor reprogramming (and updating the user code with the same code that was running before), and I haven't been able to replicate the problem. I didn't even think it was a big deal, but now that you may have the same problem there could be something wrong (and if there is, it's probably in this sequence: our code -> our RC hardware -> the PIC silicon -> Kevin's code )

Hopefully it went away, but, once again, it was too sporadical to know for sure.

Kevin, I can send you my code if you want, but I really don't think there's anything wrong with it.
Once again thanks for writing it!