|
|
|
 Theory (n.) - A mythical place where all robot designs work. - MechEng83 [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Theory (n.) - A mythical place where all robot designs work. - MechEng83 [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#23
09-03-2008, 21:56
|
|||
|
|||
|
Re: New Infrared Remote Control Software
Beware of Differing Pinouts on Vishay IR Sensors.
There are different versions of the Vishay sensors in Identical packages. The TSOP48xx family is one that works as documented with Gnd on Pin 2. However, the TSOP322 family, which is arguably better because of its 2.7 - 5.5V power supply range, has ground on pin 3 and power on pin two. This is reversed from TSPO48xx family. IF YOU USE A TSOP322XX FAMILY SENSOR AND FOLLOW KEVIN'S DIAGRAM YOU WILL INSTANTLY FRY THE SENSOR. Good practice is to always make sure you have a datasheet for the actual device you are using and double check the connections. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Remote Control Rover Help | Dominator_Legen | Math and Science | 7 | 12-02-2005 03:35 |
| Remote Control Car SUCCESS!! | arpus maximus | Control System | 77 | 10-12-2004 20:30 |
| Manual override of compressor software control | willross | Pneumatics | 15 | 18-02-2004 23:51 |
| Remote Remote Kickoff for Southern California | ChrisH | Southern California Regional Robotics Forum | 0 | 05-01-2004 12:36 |
| Remote Remote Kick off at University High School | George1902 | Off-Season Events | 4 | 04-01-2004 21:05 |
Threaded Mode