pic: Looking for Info/Parts

[Wayne C.]

Originally Posted by Cory

The motor on the right is a drill motor circa 2002 and prior. I don't remember what brand it is. Someone else with a better memory than me probably could tell you.

The brackets came from the 2003-2004 KOP. They're very poor as far as motor mounts go. They were notorious for cracking.

Ditto on the cracking- also be aware that the plastic housing for the old drill gear boxes typically would crack after a while and the gears would fail or fall out. The tiny tabs on the housing and face plate are a weak spot. It is vital to support them perfectly and allow no torque on the housing. You might put them into a drill housing and support the whole thing.

Unlike CIMS the drill motors had issues- I'd go with CIMs instead if possible