|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
pic: 1771 possible summer prototype
|
|
#2
|
||||
|
||||
|
Re: pic: 1771 possible summer prototype
Hey, just wondering, What kind of metal is that on the chassis. And how much do u think this will weigh?
|
|
#3
|
|||||
|
|||||
|
Re: pic: 1771 possible summer prototype
Quote:
Quote:
|
|
#4
|
||||
|
||||
|
Re: pic: 1771 possible summer prototype
TTLdomination
All of the sheet metal is 1/4" aluminum. The 2 outer tubes re 1.5" square by1/8" thickness. The inner cross braces are 1" square by 1/16" thick. The everything pictured including motors and gears weighs 32lbs. The only thing left is chain and a few bolts. You need to get in touch with me and we'll figure something out for you guys. |
|
#5
|
|||||
|
|||||
|
Re: pic: 1771 possible summer prototype
I would suggest making slots for where you mount the front and rear wheels, so you can adjust chain tension. It will make it a lot easier when all you have to do is pull it tighter to tighten the chain.
|
|
#6
|
||||
|
||||
|
Re: pic: 1771 possible summer prototype
One thing that you cant see well in the render is the tensioning device. it is an axle with a sprocket on it between each wheel that we tighten 2 screws and it raises the axle, thus tightening the chain. This past season we did the slots for the wheels for tensioning and although it worked well, it required removing bumpers to tension. The new system does not require removing anything. So for a small weight gain we save a lot of time during competition.
|
|
#7
|
||||
|
||||
|
Re: pic: 1771 possible summer prototype
Are the front and rear wheels raised slightly, and are you planning on using this for next year?
When I first read it I thought it meant the chain was 32 pounds, and I'm like "wow!" |
|
#8
|
||||
|
||||
|
Re: pic: 1771 possible summer prototype
The middle wheel is lowered 3/16". All of the wheels are custom traction wheels. We are planning on using it in the future as it is an upgraded design from this year.
|
|
#9
|
|||||
|
|||||
|
Re: pic: 1771 possible summer prototype
We're going to do the same thing except make a couple different drivetrains. That way when the game comes around we can choose whichever fits best and we'll have experience with all of them.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: 1771 finished | sdcantrell56 | Robot Showcase | 49 | 21-04-2008 01:25 |
| pic: 1771 teaser | sdcantrell56 | Extra Discussion | 5 | 07-02-2008 20:45 |
| pic: 1771 finished frame 2 | sdcantrell56 | Extra Discussion | 4 | 20-01-2008 15:03 |
| pic: 1771 drivetrain complete 2 | sdcantrell56 | Extra Discussion | 4 | 12-01-2008 00:57 |
| pic: 2008 drivetrain 1771 | sdcantrell56 | Extra Discussion | 9 | 10-01-2008 11:55 |