|
|
|
 No. This is CD, take the threads and their topics seriously. - pwnageNick [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| No. This is CD, take the threads and their topics seriously. - pwnageNick [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
25-06-2008, 10:17
|
|||||
|
|||||
|
Re: CAD: Making a cam mechanism
Attached is a CAM generated in Solidworks 2007. Your original post is unclear as to whether you're looking for a radius or diameter of 2"; this is built with a 2" final radius. It's trivial to make another with smaller or larger dimensions.
This was made with Solidworks' Toolbox Cam tool. It automagically generates the proper sketch geometry for the cam you need based on a series of parameters. This is the first time I've really used it, so I don't know much about its limitations, but making this first one work was pretty straightforward. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CAD/CAM/CAE Projects available, register your interest. | eProjects | CAD | 0 | 26-02-2008 21:34 |
| FIRST in CAD/CAM newsletter & Engineering TV again | Elgin Clock | FIRST In the News... | 0 | 18-01-2008 09:05 |
| CAD-CAM and Dewalts | Bill_Hancoc | Technical Discussion | 3 | 31-01-2006 02:08 |
| CAD/CAM softwear | Veselin Kolev | Inventor | 3 | 11-12-2004 23:17 |
| cnc/cad/cam help | chbix | Technical Discussion | 12 | 07-07-2004 22:40 |
Threaded Mode