Where can I order 2" wide Blue Nitrile Conveyor Belting?

[AdamHeard]

Originally Posted by Aren_Hill

You can cut pretty much any type of traction tread quite easily with a vertical bandsaw, just go grippy side down otherwise it'll usually grab the blade.

part #= 5994K851 for 3" wide nitrile roughtop
if your doing 2"wide wheels just buy the 4" wide stuff and cut it in half it works quite nicely

A little trick 60 told me way back, put the material grip side down like Aren said, but on a piece of paper. It let's it slide easier on the bandsaw and makes cutting much more convenient. You'll need paper big enough of course, but we have a huge 3' wide roll of butcher paper.