Where can I order 2" wide Blue Nitrile Conveyor Belting?

RyanN · #1 01-07-2008, 04:31

We did it the old fashion way with a utility knife, water, and a straight edge. Seemed to work well.

Jay H 237 · #2 04-07-2008, 22:33

Quote:

Originally Posted by RyanN

We did it the old fashion way with a utility knife, water, and a straight edge. Seemed to work well.

That's the same way we've cut conveyor belt where I work. Gives you a nice crisp, clean cut. Just make sure you have a good blade otherwise you'll be tearing the material and the knife may keep "grabbing" as you try to cut it.

RyanN · #3 05-07-2008, 01:14

Quote:

Originally Posted by Jay H 237

That's the same way we've cut conveyor belt where I work. Gives you a nice crisp, clean cut. Just make sure you have a good blade otherwise you'll be tearing the material and the knife may keep "grabbing" as you try to cut it.

Indeed, having a sharp blade will make things easier and safer. We cut from the bottom side. All I have to work on is making straight cuts; I'm pretty shaky with knifes, wires, etc... (Probably not good since I'll be an electrical engineer soon. I can see so many bad things from being shaky.)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where can we order add'l joysticks?	W.O.E.H.	Control System	1	11-02-2008 17:21
Where can teams order jumpsuits?	Spindash54	Team Organization	4	28-01-2006 20:41
Where can you order pneumatics?	Nitroxextreme	Pneumatics	4	09-02-2005 14:26
Warning to teams using a certain incline conveyor belting.	Patrick Wang	Technical Discussion	3	12-03-2003 13:38
Chief Delphi: where'd you get that amazing conveyor belting?	archiver	2001	1	24-06-2002 04:13