Go to Post math and physics save a lot of money!!! Pay attention in school - this is why your teachers are torturing you with this stuff. - Chris Hibner [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #13   Spotlight this post!  
Unread 21-07-2008, 13:56
Mike Wittman's Avatar
Mike Wittman Mike Wittman is offline
Plastic Man
FRC #1714 (More Robotics)
Team Role: Coach
 
Join Date: Mar 2008
Rookie Year: 2003
Location: Milwaukee
Posts: 25
Mike Wittman is an unknown quantity at this point
Re: Acrylic Gearbox Sideplates

Hi Andy, everyone so far is right. Avoid Acrylic. It is far to brittle to use for a gearbox. In addition, laser cutting will introduce its own stress into the material making it more prone to crack or break. What you gain in structuring your cuts you loose in how the laser affects the material.

I like what squirrel suggested. Make a template and use it to machine your Polycarbonate (PC). I often laser engrave Polycarbonate and then machine to the line. It is also nice for picking or marking center points to drill.

You can cut PC with a laser. You usually need a high wattage laser to do it however, it can be done with multiple passes. It is a very messy process making lots of smoke, leaving lots of residue and also charring the edges of your material, but it can be done.

There is an alternative material you may want to use. It is called PETG. It's properties are somewhere between brittle Acrylic and durable Polycarbonate. The advantage of this material is that it will laser cut cleanly. It can still crack and break, but it is deffinately going to hold up better than Acrylic.
__________________
Mike

Tie two birds together, though they have four wings they cannot fly

www.morerobotics.org
Learn More, Give More, Be More
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gearbox pt 2 bobdahaxor Technical Discussion 14 22-12-2007 11:24
Gearbox bobdahaxor Technical Discussion 1 13-12-2007 19:34
Offseason gearbox project... maybe this gearbox has helical gears? Travis Covington Technical Discussion 17 05-06-2006 11:48
Gearbox Lord Nerdlinger Motors 20 15-07-2003 00:38
Gearbox ZACH P. Motors 4 09-02-2003 20:14


All times are GMT -5. The time now is 08:24.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi