|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#14
|
|||
|
|||
|
I got answers from FIRST (Ron) - PVC and Weight Supports
Posted by Mark Pierce at 1/9/2001 12:04 PM EST
Other on team #288, RoboDAWGS, from Grandville High School and X-Rite, Delphi, and others. In Reply to: I got answers from FIRST (Eric) Posted by Raul on 1/8/2001 12:56 PM EST: Here are some question and answers I got from Ron: >1. The quantity of PVC1 should be 16 per goal. (8 sides, 2 pcs on either side of the tee). 1. Yes there should be 16. >2. The Bill of material for WT1 says 10 - 3 pounds weights, but the pictures from the kickoff look like 6 weights on a side. Are these 12 - 2.5 lb weights? 2. There are actually 12 weights total and they are 3 pound Weider cast iron weights. >3. The pipes listed as P12, P13, P14 Are used to hold the weights, but how are they assembled? The drawings do not help much on this. 3. The 1" pipe is inserted flush in the 1-1/4" pipe and the 3/4" pipe is a tight fit in the 1" pipe. It looks to me like the length of PVC1 might be wrong also, when comparing to pictures. Anyone have a measurement? ( I submitted a question in my reply to Ron, but I'm sure he's swamped.....) Mark |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Thanks Scott, Steve, Eric, Mike, Chris, Frank, Kevin, Dane, and Phil | Collin Fultz | Thanks and/or Congrats | 6 | 25-03-2003 20:40 |
| Answers from The Meeting Company | dhendrix | Championship Event | 0 | 20-03-2003 11:41 |
| FIRST message board- no answers? | Jeff Waegelin | General Forum | 2 | 13-01-2003 22:40 |
| Answers...Answers... | archiver | 2001 | 1 | 24-06-2002 03:58 |
| Answers about auto-balancing | archiver | 2001 | 4 | 24-06-2002 02:14 |