|
Design Suggestion
Posted by Thomas A. Frank at 1/8/2001 1:33 PM EST
Engineer on team #121, The Islanders/Rhode Warrior, from Middletown (RI) High School and Naval Undersea Warfare Center.
Hello All;
I'd like to offer up one suggestion for something all our 'bot's should have.
Someplace on at least one end of the machine, we should all place a "handle" that is the equivalent of the rail on the goal and the stretcher. This way, should any of our machines become disabled during a match, our partner will be able to pull us over the ramp and into the end zone.
Since FIRST has kindly provided a "standard" interface for the goal and stretcher (or so it would seem from the prints, we'll know for certain when we build it), it makes sense to continue the concept.
Tom Frank
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|
The reason I care about it is that I don't want minorities (whether that's females or other racial minorities) to see the STEM world as only inclusive of majorities or men. - Monochron [more] 
Similar Threads
Threaded Mode