Go to Post FIRST like life is what you make of it, if you would rather go through FIRST worrying about what other teams do to make their robots, then your destined for disappointment. if you go through FIRST making the most of it doing the best you and your team can then it doesn't matter what other teams do. - Mike Schroeder [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Spotlight this post!  
Unread 25-08-2008, 09:23
Teched3 Teched3 is offline
Hodge1
FRC #0175 (BuzzRobotics)
Team Role: Mentor
 
Join Date: Apr 2006
Rookie Year: 1996
Location: Connecticut
Posts: 319
Teched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud of
Smile Re: Flanged Roller Bearings

Just some clarification in that you will need to design in a method of adjustment for the tapered roller bearing, and be able to maintain this adjustment. A castle nut/cotter pin configuration such as found on older vehicle front wheel bearings are a common design solution. The race portion of the bearing is usually press fit into a bore with a shoulder to set the race spacing.
__________________
Sweat the details
Why is there never enough time to do it right, but always enough time to do it again!
Even if you're on the right track, if you sit still, you'll get run over!!!
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Roller Prototype sdexp Robot Showcase 0 04-02-2006 22:41
Looking for 1/2" id flanged bearing .25" thick or less (with flange) Travis Covington Technical Discussion 17 12-12-2004 21:26
Uneven Thrust Loads on Needle Roller Bearings Madison Technical Discussion 7 07-02-2004 01:00
Where to get 1/2" Flanged bearings? sanddrag Technical Discussion 13 15-01-2004 22:04
Cheapest place to get 3/8 inch ID double sealed flanged precision bearings? Travis Covington Technical Discussion 5 24-02-2003 22:39


All times are GMT -5. The time now is 08:13.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi