|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
pic: Team 522, McKee HS. and The Robo Wizards
|
|
#2
|
||||
|
||||
|
Re: pic: Team 522, McKee HS. and The Robo Wizards
you know somewhere out there, at this very moment, theres a fedex guy that is thinking "wtf?"
|
|
#3
|
|||||
|
|||||
|
Re: pic: Team 522, McKee HS. and The Robo Wizards
I like this, does anyone have any specs on this and the amount of money needed?
|
|
#4
|
|||
|
|||
|
Re: pic: Team 522, McKee HS. and The Robo Wizards
Quote:
If you read this thread you'll see that people were pretty much flabergasted by the expense of this project. Apparently, the plate was donated by a sponsor. For a rough estimate McMaster quotes a 48"x96" 1/8" thick plate as $532.... You need at least five of those... ![]() |
|
#5
|
||||
|
||||
|
Re: pic: Team 522, McKee HS. and The Robo Wizards
i would be more worried about the weight cost than the material costs.
![]() |
|
#6
|
|||
|
|||
|
Re: pic: Team 522, McKee HS. and The Robo Wizards
If only our school had the money. If only, if only.
|
|
#7
|
||||
|
||||
|
Re: pic: Team 522, McKee HS. and The Robo Wizards
Ha, shouldve been there when we put it together.... oooohhhh fun times! lol
"lift this.." "WHAT?!?" "lift it.." "yeah sure... getting right on it..." *drops on foot* lol and believe it or not.. we weighed it up against a few other plywood crates.. the box wasn't much heavier than u think. like.. 10-15 lbs. dont judge a book by its cover. think, all that doublin up on plywood, 2x4's to keep robot in place and reinforcement of walls adds up on the weight department The Robowizards dont like to take chances when it regards one of their girls =D after seeing way to many broken crates.. eh... thank god for diamond plate Last edited by jax1488 : 31-08-2008 at 23:38. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|