|
|
|
 The Chairman's award is about doing what you can to strengthen the FIRST community. It doesn't require money to simply lend tools, wise advice or a hand. - Koko Ed [more] |
 |
|
|||||||
|
||||||||
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| The Chairman's award is about doing what you can to strengthen the FIRST community. It doesn't require money to simply lend tools, wise advice or a hand. - Koko Ed [more] |
|
|
|||||||
|
||||||||
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
A little help please...
Posted by Josh at 1/16/2001 3:33 PM EST
Engineer on team #419, Rambots, from Wentworth Institute of Technology. Alright, this might not even be on our robot, but it is a technical question about a special addon that we were thinking about. You might want to sit down for this...What i need to know is (brace yourself) i was wondering how to mount the insides of one of those slamball things (the ones that say "OUCH! That Hurt!" when you hit them) into the head of a tickle-me elmo. It's just an idea, but if we have the time, it's something i think could work. Josh "...you don't much look like a steer to me boy..." -Full Metal Jacket |
|
#2
23-06-2002, 23:03
|
|||
|
|||
|
oh, one more thing...
Posted by Josh at 1/16/2001 3:36 PM EST
Engineer on team #419, Rambots, from Wentworth Institute of Technology. In Reply to: A little help please... Posted by Josh on 1/16/2001 3:33 PM EST: I also would apreciate it if you could shed a little light on how to raise the tone of the voice inside the slamball voicechip (you know, cause it's gotta sound like elmo). Thanks again. Josh "I'm in over my head" -Lit (the only good song they ever wrote.) |
|
#3
23-06-2002, 23:03
|
|||
|
|||
|
Re: oh, one more thing...
Posted by Justin Stiltner at 1/17/2001 12:39 AM EST
Student on team #388, Epsilon, from Grundy High School and NASA, American Electric Power, Town of Grundy. In Reply to: oh, one more thing... Posted by Josh on 1/16/2001 3:36 PM EST: : I also would apreciate it if you could shed a little light on how to raise the tone of the voice inside the slamball voicechip (you know, cause it's gotta sound like elmo). Thanks again. : Josh : "I'm in over my head" -Lit (the only good song they ever wrote.) To insert the voice box collect the following. 1. Big knife (doesent really have to be big but it will look cooler) 2. Needle 3. thread 4. voice box 5. tickle me elmo Cut the stich at the back of the head and pull out the stuffing, Put the voice box in the stuffing and shove it back in. Then sew him back up and start smacking him. as for the voice I dont know Justin Stiltner Team #388 Epsilon Grundy Va, |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
