|
|
|
![]() |
|
|||||||
|
||||||||
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Gyro
Posted by Eric at 1/18/2001 11:48 AM EST
Coach on team FEDS from RHS sponsored by Visteon. Does anyone have any suggestions on programming for the gyro. Specifically, does it output in the same way that a pot. does (127 = no rotation, 254 = max rotation, 0 max backward rotation,...? Also if anyone could point me toward some sample code, I would appriciate it (Already checked the white pages here and that has helped.) Eric |
|
#2
|
|||
|
|||
|
Re: Gyro
Posted by Lloyd Burns at 1/18/2001 7:00 PM EST
Other on team #188, Woburn Robotics, from Woburn Collegiate and Canada 3000, ScotiaBank, Royal Bank Financial. In Reply to: Gyro Posted by Eric on 1/18/2001 11:48 AM EST: : Does anyone have any suggestions on programming for the gyro. Specifically, does it output in the same way that a pot. does (127 = no rotation, 254 = max rotation, 0 max backward rotation,...? : Also if anyone could point me toward some sample code, I would appriciate it (Already checked the white pages here and that has helped.) : Eric Ours seemed to favour 126 for neutral, and rotaatioon in the poositive direction took it higher, just like a pot ! :-) |
|
#3
|
|||
|
|||
|
Re: Gyro
Posted by Joe Ross at 1/18/2001 7:06 PM EST
Engineer on team #330, Beach Bot, from Hope Chapel Academy and NASA/JPL , J&F Machine, and Raytheon. In Reply to: Re: Gyro Posted by Lloyd Burns on 1/18/2001 7:00 PM EST: Our center point last year was somewhere around 120. Like the gyro whitepaper says, they do tend to drift. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| gyro code | odin892 | Programming | 2 | 08-04-2003 14:50 |
| Help with the gyro chip | Team852 | Electrical | 1 | 10-01-2003 22:31 |
| Is any team using the gyro chip? | Ragin_Kage | Kit & Additional Hardware | 4 | 10-04-2002 12:11 |
| Voodoo Gyro Chips... | Ghetto_Child | Technical Discussion | 3 | 01-02-2002 16:39 |
| Have YOU used the gyro chip? | FotoPlasma | Technical Discussion | 10 | 31-01-2002 13:26 |