[FTC]: Anyone know the actual height of the puck rack?

ttldomination · #1 22-10-2008, 16:09

Also, although the hole for the pivoting part of the puck rack may be 18.5", the actual little square piece to pull down the rack can be lower. So, it might depend.

jjbbjjt - How high was the rack's little square piece from the bottom of the floor? Did you measure from the foam tile?

jbbjjbt · #2 23-10-2008, 11:25

Quote:

Originally Posted by ttldomination

Also, although the hole for the pivoting part of the puck rack may be 18.5", the actual little square piece to pull down the rack can be lower. So, it might depend.

jjbbjjt - How high was the rack's little square piece from the bottom of the floor? Did you measure from the foam tile?

I haven't measured although I do know in DEL/NJ the pull down piece was 2" long rathar than the specified 1.5." Also on our field in my basement I have at least 1/4 " variance because the basement floor is not flat.

ttldomination · #3 23-10-2008, 16:54

Hm... I see that's a real problem. Anyone consulted FIRST about this?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FTC]: The Rack colors	addictedMax	FIRST Tech Challenge	3	18-09-2008 23:06
Does anyone know the significance of the division names?	Adam Y.	Championship Event	2	06-04-2004 20:12
Anyone know the animation winners? (I know team 191,who else	archiver	2001	3	24-06-2002 03:24
So does anyone know what the name of the new field	archiver	2001	4	24-06-2002 03:01
the Puck	archiver	2000	5	23-06-2002 23:08