|
Re: one more thing i have to ask
Posted by Stephen Riley at 1/19/2001 7:34 PM EST
Engineer on team #419, RAMBOTS, from Wentworth Institute of Technology and Umass/BCHigh and Mathsoft, Solidworks, and NASA.
In Reply to: Re: one more thing i have to ask
Posted by Ed Sparks on 1/19/2001 7:13 PM EST:
: The Kee Klamp catalog indicates that the distance from the bottom of the KK70-7 (top surface of the plywood) and the centerline of the pipe that makes up the handle should be 2.5"
thank you, very helpful
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|