2009 Controls Inventor model?

[EricVanWyk]

These models were released to Beta teams many weeks ago - they actually got the exact models used to manufacture the parts, and had every detail down to the resistors. Autodesk was then kind enough to clean up and simplify them.

I do not know the official date or method to release to the rest of the teams.

[merybar]

is there a particular reason that they can not be released now?

[Ellery]

Aren't the components for the CRIO already on the NI.com site - they are iges/step formats that you can import.

[R.C.]

Can someone post the links please.

[samir13k]

OK, i am just about done with the cRio inventor model that i have been working on all day. If anyone needs i can try to email it to them. It has the overall dimensions fairly close, but it lacks very minor details. For inventor puroposes though it is perfectly recognizeable and very close in overall dimensions.

just email me and i can try to get it to you asap through email, or may have it posted somewhere within the next few days.

[R.C.]

Email me Please!!!

[ebmonon36]

Here is the link to the web page listing all of the cRio models available.
http://digital.ni.com/hardref.nsf/di...node=200533_US

Drawings are available in IGES, STEP and ProE formats.

Visually, this looks like the cRio that ours is derived from:
http://digital.ni.com/hardref.nsf/we...2573ad00683537

[samir13k]

ok, i have my cRio done now, and i can send it to anyone that needs it. Just email me at samir13k@hotmail.com.

[Ed Sparks]

As soon as I recieve the Controls kit, I'll start modeling and posting on FirstCadLibrary. These models will be weight accurate and more detailed.

[samir13k]

Originally Posted by Ed Sparks

As soon as I recieve the Controls kit, I'll start modeling and posting on FirstCadLibrary. These models will be weight accurate and more detailed.

I have updated my model, but for competition purposes you may want to use FirstCadLibrarys version as soon as it comes out. As for now, mine is still available for quick drawings and temporary use if you would like. Just email me. I will warn you that it is not completely accurate. I could not find a fully dimensioned drawing, so i had gone off what i could find.

[Ed Sparks]

Originally Posted by samir13k

I have updated my model, but for competition purposes you may want to use FirstCadLibrarys version as soon as it comes out. As for now, mine is still available for quick drawings and temporary use if you would like. Just email me. I will warn you that it is not completely accurate. I could not find a fully dimensioned drawing, so i had gone off what i could find.

Nice work. BTW My last post was not intended to be a dig on your model. I was speaking of the generic models on the NI site.

[EricVanWyk]

I'm really confused here... didn't the actual models get released through autodesk?