|
|
|
 The easiest and most effective way to do this for the Championship event is pre-competition scouting, with statistics. Nothing beats it. Hands down. Period. The End. Nothing's better. - Tom Bottiglieri [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#8
23-06-2002, 23:27
|
|||
|
|||
|
Re: thinking of building my own robot...
Posted by Al Skierkiewicz at 1/23/2001 1:37 PM EST
Other on team #111, Wildstang, from Wheeling High & Rolling Meadows High and Motorola. In Reply to: thinking of building my own robot... Posted by Rob DeCotiis on 1/22/2001 7:17 PM EST: Rob, The Innovation First controllers are based on the Basic Stamp microcontroller. These devices are avaialable from Digi-Key, you need the chip kit, software and programming cable but they program in P-Basic like the robot controller. The Stamp is manufactured by Parallax inc. You have to provide the wireless link though. Al http://www.digikey.com/ http://www.parallaxinc.com/ |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Where do you actually build your robot and who does the building??? | Elgin Clock | General Forum | 47 | 14-11-2006 17:50 |
| How much planning goes into your robot? | Jnadke | General Forum | 41 | 29-01-2006 21:29 |
| WASH Palm scouting at the Championship | Mike Soukup | Scouting | 2 | 19-04-2002 15:14 |
| What purpose are you building your robot for? | Anton Abaya | General Forum | 15 | 24-01-2002 00:36 |
| about how Drive Train push the robot... shouldn't the force accelerate the robot? | Ken Leung | Technical Discussion | 12 | 26-11-2001 09:39 |
Threaded Mode