|
Re: No, but you can copy the design
Posted by ChrisH at 1/23/2001 1:31 PM EST
Engineer on team #330, Beach 'Bots, from Hope Chapel Academy and NASA JPL, J & F Machine, Raytheon, et al.
In Reply to: No, but you can copy the design
Posted by Andy Baker on 1/23/2001 10:28 AM EST:
Actually, it may be that you can. If it's a fastener it's on the additional hardware list and is unlimited. As I recall if it holds two or more parts in FIXED relation to one another, it's a fastener. But I'd check with one of the technical reps at FIRST before I based my robot around it.
You'd be suprised what can be a fastener!
Chris Husmann,PE
Team 330 the Beach'Bots
: Will,
: No, you can't legally grab a muffler clamp and modify it to mount your motor.
: But, you can use approved materials (on Additional Hardware List or out of Small Parts, Inc.) to make your own clamps that look just like the muffler clamps.
: Good luck,
: Andy B.
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|
Enlighten a man who sometimes has difficulty understanding why others stray outside the box, when the box appears to be an optimized and elegant solution. - JVN [more] 
23-06-2002, 23:29
Threaded Mode