|
|
|
 It is one thing to be a great designer, it is another thing to be able to explain what you did, how things work, and why things happen. - Andy Baker [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| It is one thing to be a great designer, it is another thing to be able to explain what you did, how things work, and why things happen. - Andy Baker [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
23-06-2002, 23:31
|
|||
|
|||
|
Re: dimensions of horizontal bar
Posted by mike o'leary at 1/23/2001 10:32 PM EST
Student on team #419, rambots, from bc high. In Reply to: dimensions of horizontal bar Posted by Travis Covington on 1/23/2001 8:03 PM EST: : what is the distance from the top of the plywood base of the goal to the center of the horizontal 1 1/4 in. aluminum pipe. Also what is the distance from the center of the same pipe to the edge of the base of the goal. i know our team did the math and im pretty sure that we got a distance of 14.5" from the plywood to the bottom of the pipe hope that helps mike |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Grab bar on bottom of goals | archiver | 2001 | 0 | 24-06-2002 00:49 |
| how effective do you think robots going under the bar | archiver | 2001 | 4 | 24-06-2002 00:36 |
| side barrier dimensions | mrobrien | Rules/Strategy | 3 | 16-01-2002 11:22 |
| Shelf and board dimensions still don't add up | kmcclary | Off-Season Events | 12 | 20-10-2001 09:12 |
| Field and shelf missing dimensions | kmcclary | Off-Season Events | 3 | 12-10-2001 18:21 |
Threaded Mode