|
|
|
![]() |
|
|||||||
|
||||||||
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
How Many drill motors are we allowed to use.
Posted by Glenn M. Krcek at 1/23/2001 9:02 PM EST
Other on team #226, Manhatan Project, from Troy and Athens High and GM CRW. Can we use four for example ? Any thoughts? |
|
#2
|
|||
|
|||
|
Re: How Many drill motors are we allowed to use.
Posted by Jason Rudolph at 1/23/2001 9:18 PM EST
Other on team #459, Rampage, from University of Florida/Eastside High School and . In Reply to: How Many drill motors are we allowed to use. Posted by Glenn M. Krcek on 1/23/2001 9:02 PM EST: : Can we use four for example ? : Any thoughts? NO. You can only use the motors provided to you in the kit, since there are only two drill motors in the kit, you can only use two drill motors on your robot. Jason |
|
#3
|
|||
|
|||
|
yes he's right..
Posted by Anton Abaya at 1/23/2001 11:08 PM EST
Coach on team #419, Rambots, from UMass Boston / BC High and NONE AT THE MOMENT! .In Reply to: Re: How Many drill motors are we allowed to use. Posted by Jason Rudolph on 1/23/2001 9:18 PM EST: : : Can we use four for example ? : : Any thoughts? : NO. You can only use the motors provided to you in the kit, since there are only two drill motors in the kit, you can only use two drill motors on your robot. : Jason you can however use ALL your other motors in addition to the drills. As for the drills, I highly suggest you get spares in the worst case scenario especially if your drills will be driving your bot. -anton |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Q&A Discuss: HOT drill motors | CD47-Bot | Extra Discussion | 1 | 27-01-2003 13:31 |
| Complete Drill, Seat, and Window motors for trade | archiver | 2000 | 0 | 23-06-2002 22:16 |
| Complete Drill, Seat, and Window motors for trade | archiver | 2000 | 0 | 23-06-2002 22:16 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |
| what about the drill motors? | Ken Leung | Motors | 2 | 26-06-2001 02:11 |