|
|
|
 The weight sounds about right, too. If you need more than 65 pounds for your manipulator, then the drivetrain isn't the part you should be redesigning... - s_forbes [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| The weight sounds about right, too. If you need more than 65 pounds for your manipulator, then the drivetrain isn't the part you should be redesigning... - s_forbes [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
27-11-2008, 17:38
|
|||||
|
|||||
|
Re: 2009 Driver Station Dimensions
6 1/8" x 4 5/8" x 1 3/16"
The .1" header pins and the competition port stick out another 1/8" each The competition port enable/disable switch they send us sticks out 2 1/8" in all from the case. screw heads on the sides take 1/16" each There's a photo here somewhere...let me look...   I'm told we'll probably want to mount it with velcro. Last edited by Mark McLeod : 27-11-2008 at 20:00. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Driver Station Blank Screen, Anyone have the same problem? | LDavies562 | FRC Control System | 14 | 22-12-2008 19:34 |
| pic: The new driver station | Billfred | Extra Discussion | 28 | 23-04-2008 20:07 |
| pic: Why FIRST needs to make the driver station taller | Jay Trzaskos | Extra Discussion | 12 | 12-03-2007 08:57 |
| Serial Driver and 2K6 Encoder Driver Not compatible | Tom Bottiglieri | Programming | 6 | 12-02-2006 01:11 |
| size of driver playing station | 663.keith | Technical Discussion | 1 | 11-01-2005 13:23 |
Threaded Mode