Metal strips on ends of bridge

archiver · #1 06-23-2002, 11:34 PM

Posted by Mike Fenton at 1/24/2001 7:33 PM EST

Engineer on team #121, Rhode Warrior, from Middletown High School and NUWC.

i looked at the dwgs and it seems that the 5 inch
metal strips hang over the platform ends by 3
inches. Does the part attached to the plywood go
over the carpet or under the carpet?

archiver · #2 06-23-2002, 11:34 PM

Posted by Brian at 1/24/2001 7:59 PM EST

Student on team #56, Robbe Xtreme, from Bound Brook High School and Ethicon Inc..

In Reply to: Metal strips on ends of bridge
Posted by Mike Fenton on 1/24/2001 7:33 PM EST:

It goes over the carpet

archiver · #3 06-23-2002, 11:35 PM

Posted by Ken Leung at 1/25/2001 5:10 AM EST

Student on team #192, Gunn Robotics Team, from Henry M. Gunn Senior High School.

In Reply to: Metal strips on ends of bridge
Posted by Mike Fenton on 1/24/2001 7:33 PM EST:

According to team update 5, the metal strips are hanging out 4 inches from the platform ends instead of 3inches.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curie Division Robots information... (not complete)	archiver	2001	3	06-24-2002 03:13 AM
Team 111 Picture	archiver	2001	18	06-24-2002 12:50 AM
Wedge and Solenoids	archiver	2001	3	06-24-2002 12:17 AM
The bridge ... moves?	archiver	2001	3	06-23-2002 11:04 PM
Using Base 36 "Compression" For Easier Scouting and Other Interesting Tidbits	Adrian Wong	Rules/Strategy	9	09-21-2001 08:28 PM