|
|
|
 Don't tell the rookies to "not touch the robot", show them how to work safely. - Andy Baker [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Don't tell the rookies to "not touch the robot", show them how to work safely. - Andy Baker [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
LV 2009 Dashboard
We've got our early 2009 control system. We've done the bench-top test, upgraded the Driver Station, LabVIEW and the cRIO. We've deployed the Basic project (set to run at start-up). That seems to work, we get the battery voltage readout on the DS. Before connecting our motors up, we wanted to verify the outputs via the dashboard. We connected our PC to the Driver station and the driver station to Ethernet port 1 on the cRio . We can connect with the cRio (deploy, etc). When we run the dashboard though, we do not get any updates. What are we missing? Is there a dashboard enable or something we are missing?
Thanks, -Terry |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Labview Dashboard and updated IFI dashboard spec | Joe Ross | LabView and Data Acquisition | 1 | 04-04-2006 02:04 |
| 2004 Dashboard Protocal vs 2005 Dashboard Protocal | Kyle T | Programming | 4 | 14-03-2005 22:19 |
| dashboard | archiver | 2000 | 1 | 23-06-2002 23:06 |
| Dashboard in VB | archiver | 2000 | 2 | 23-06-2002 22:49 |
| Dashboard in C/C++ | archiver | 2000 | 0 | 23-06-2002 22:48 |
Threaded Mode