Go to Post [You know you've overdosed on FIRST when...] When you discover that the cure to the swine flu is "oink oink BOOM!" - Katie_UPS [more]
Home
Go Back   Chief Delphi > FIRST > Rumor Mill
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Reply
Thread Tools Rate Thread Display Modes
  #16   Spotlight this post!  
Unread 14-12-2008, 11:30
Pat McCarthy Pat McCarthy is offline
FiM Volunteer
FRC #0067 (HOT Team)
Team Role: Alumni
 
Join Date: May 2003
Rookie Year: 2003
Location: Grand Rapids, MI
Posts: 593
Pat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond reputePat McCarthy has a reputation beyond repute
Send a message via AIM to Pat McCarthy
Re: HDPE or ICE FLOOR

We certainly know the idea has been floating around in the GDC's heads for a few years:


http://www.chiefdelphi.com/media/photos/22422
__________________
2003-2006: FRC Team 67 - Drafter, Driver, Student Leader
2006 Volunteering: Kettering Kickoff Ref, Team Ford FIRST Robotics Invitational Ref
2007 Volunteering: GLR Field Reset/Repair; WMR Robot Inspector and Scorekeeper; MARC Referee
2008 Volunteering: WMR Planning Committee, WMR Scorekeeper, MARC Ref, IRI Scorekeeping, WMRI Scorekeeping & DJ
2009 Volunteering: Kettering District, MARC, IRI, and WMRI Scorekeeper/Field Power Controller
2010 Volunteering: Kettering District, MARC, IRI, and WMRI Scorekeeper/Field Power Controller
2011 Volunteering: Waterford District, West Michigan District, MARC, & IRI DJ
2012 Volunteering: Waterford District, West Michigan District DJ
Reply With Quote
  #17   Spotlight this post!  
Unread 14-12-2008, 11:35
billbo911's Avatar
billbo911 billbo911 is offline
I prefer you give a perfect effort.
AKA: That's "Mr. Bill"
FRC #2073 (EagleForce)
Team Role: Mentor
 
Join Date: Mar 2005
Rookie Year: 2005
Location: Elk Grove, Ca.
Posts: 2,384
billbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond reputebillbo911 has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by dtengineering View Post
So although my fellow Canadians may strip me of my citizenship for letting out this little piece of information, nothing grips ice quite like broomball shoes.
.....Now someone just needs to wrap them around a set of AM or IFI traction wheels and the ice races are on!
Oh man, talk about putting images in my head!!

Most of all, I keep seeing Dave's "Boot-Drive" robot that keeps showing up in his game animations. Every year a drive train like that hit's our design considerations process. Every year we laugh, then move on to more serious concepts. Maybe this year we will consider it a bit more seriously. Hey, take a look at the new Vex leg wheels. It makes you really think
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
Reply With Quote
  #18   Spotlight this post!  
Unread 14-12-2008, 11:51
NickE's Avatar
NickE NickE is offline
_
FRC #0254 (The Cheesy Poofs)
Team Role: Engineer
 
Join Date: Mar 2008
Rookie Year: 2008
Location: San Jose, CA
Posts: 620
NickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond reputeNickE has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by samir13k View Post
Broomball... Like Curling?
Except played with a ball instead of a stone?
Reply With Quote
  #19   Spotlight this post!  
Unread 14-12-2008, 12:18
MrForbes's Avatar
MrForbes MrForbes is offline
Registered User
AKA: Jim
FRC #1726 (N.E.R.D.S.)
Team Role: Mentor
 
Join Date: Feb 2006
Rookie Year: 2006
Location: Sierra Vista AZ
Posts: 6,033
MrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by Tanis View Post
I would probably say ice is not a possibility, for two reasons.
First, maintenance between matches would be annoying. Zambonis?
Ahhhh....that explains the first part of Game Hint #2!
Reply With Quote
  #20   Spotlight this post!  
Unread 14-12-2008, 13:02
EricH's Avatar
EricH EricH is offline
New year, new team
FRC #1197 (Torbots)
Team Role: Engineer
 
Join Date: Jan 2005
Rookie Year: 2003
Location: SoCal
Posts: 19,825
EricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by samir13k View Post
Broomball... Like Curling?
More like hockey played with brooms and a nice big ball (say, a little smaller than a playground ball). Oh, and you don't wear ice skates. The groups I've played with used street shoes. Evidently, that isn't the only way to do it.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons

"Rockets are tricky..."--Elon Musk

Reply With Quote
  #21   Spotlight this post!  
Unread 14-12-2008, 16:27
Cory's Avatar
Cory Cory is offline
Registered User
AKA: Cory McBride
FRC #0254 (The Cheesy Poofs)
Team Role: Engineer
 
Join Date: May 2002
Rookie Year: 2001
Location: Redwood City, CA
Posts: 6,824
Cory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond reputeCory has a reputation beyond repute
Send a message via AIM to Cory
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by gorrilla View Post
conveyor belts for traction,

luckily we are only miles from g&t conveyor systems (they make airline baggage handeling things)
Like I said earlier, surface area doesn't matter.

HDPE and ice are as close as possible to an "ideal" surface from a physics standpoint. The reason surface area might matter on carpet is because the tread can interlock with the carpet.

On ice or HDPE the surface is totally slick, so there is no possible way for the tread to interlock with the HDPE, and thus surface area does not matter, only coefficient of friction and normal force.
__________________
2001-2004: Team 100
2006-Present: Team 254
Reply With Quote
  #22   Spotlight this post!  
Unread 14-12-2008, 17:19
maltz1881 maltz1881 is offline
Registered User
#1322
 
Join Date: Feb 2005
Location: Fenton, Michigan
Posts: 225
maltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant futuremaltz1881 has a brilliant future
Re: HDPE or ICE FLOOR

HDPE is what milk jugs are made of. We have made several robots out of HDPE. Very easy to work with and we keep lots of it on hand. Very strong and durable.
Reply With Quote
  #23   Spotlight this post!  
Unread 14-12-2008, 18:53
Gdeaver Gdeaver is offline
Registered User
FRC #1640
Team Role: Mentor
 
Join Date: Mar 2004
Rookie Year: 2001
Location: West Chester, Pa.
Posts: 1,370
Gdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond reputeGdeaver has a reputation beyond repute
Re: HDPE or ICE FLOOR

For the stack attack game, we found that McMaster-Carr Grip all neoprene rubber had very good traction on HDPE. Our problem was that it gripped to well on carpet (4" wide wheel). If we had less width and more power than the drill motors it would have worked well.
Reply With Quote
  #24   Spotlight this post!  
Unread 14-12-2008, 20:49
gorrilla's Avatar
gorrilla gorrilla is offline
1557 alumni, 4639 mentor
AKA: adam spears
FRC #4639 (RoboSpartans)
Team Role: Mentor
 
Join Date: Mar 2008
Rookie Year: 2007
Location: Houston
Posts: 958
gorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant future
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by Cory View Post
Like I said earlier, surface area doesn't matter.

HDPE and ice are as close as possible to an "ideal" surface from a physics standpoint. The reason surface area might matter on carpet is because the tread can interlock with the carpet.

On ice or HDPE the surface is totally slick, so there is no possible way for the tread to interlock with the HDPE, and thus surface area does not matter, only coefficient of friction and normal force.


the conveyor belts they make are for moving bags around an airport, they are a like tiny little plastic plates with rubber tread on them, were you thinking like timing belt kinda thing?
__________________
Adam Spears



Team 1557 2007-2011 student-Lake County FL

Current Team 4639 mentor- Houston TX
Reply With Quote
  #25   Spotlight this post!  
Unread 14-12-2008, 20:57
EricH's Avatar
EricH EricH is offline
New year, new team
FRC #1197 (Torbots)
Team Role: Engineer
 
Join Date: Jan 2005
Rookie Year: 2003
Location: SoCal
Posts: 19,825
EricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by gorrilla View Post
the conveyor belts they make are for moving bags around an airport, they are a like tiny little plastic plates with rubber tread on them, were you thinking like timing belt kinda thing?
Traction is directly related to frictional force. Force = mu * N, where mu is the coefficient of friction and N is the normal force (force directed directly away from a surface that something with friction is on). Notice the lack of area in that equation? Yep, there's a reason for that. Namely, surface area doesn't matter.

There's been discussion of this issue already, some years ago. Look it up.

And, the only way to increase mu is to increase the coefficient of friction. You can a) change materials or b) dig one material into the other. If you try doing b) to an HDPE section of the field, I'll call a rules violation, assuming there is a "no damaging the field" rule again.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons

"Rockets are tricky..."--Elon Musk


Last edited by EricH : 14-12-2008 at 20:59.
Reply With Quote
  #26   Spotlight this post!  
Unread 14-12-2008, 21:02
gorrilla's Avatar
gorrilla gorrilla is offline
1557 alumni, 4639 mentor
AKA: adam spears
FRC #4639 (RoboSpartans)
Team Role: Mentor
 
Join Date: Mar 2008
Rookie Year: 2007
Location: Houston
Posts: 958
gorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant future
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by EricH View Post
Traction is directly related to frictional force. Force = mu * N, where mu is the coefficient of friction and N is the normal force (force directed directly away from a surface that something with friction is on). Notice the lack of area in that equation? Yep, there's a reason for that. Namely, surface area doesn't matter.

There's been discussion of this issue already, some years ago. Look it up.

And, the only way to increase mu is to increase the coefficient of friction. You can a) change materials or b) dig one material into the other. If you try doing b) to an HDPE section of the field, I'll call a rules violation, assuming there is a "no damaging the field" rule again.

i know, i think ive read that......

i was thinking treads becuase i felt they would give the most stable platform on a slick surface

really its either that or wheels, and i dont think they would make the entire floor HDPE.........
__________________
Adam Spears



Team 1557 2007-2011 student-Lake County FL

Current Team 4639 mentor- Houston TX
Reply With Quote
  #27   Spotlight this post!  
Unread 14-12-2008, 21:08
EricH's Avatar
EricH EricH is offline
New year, new team
FRC #1197 (Torbots)
Team Role: Engineer
 
Join Date: Jan 2005
Rookie Year: 2003
Location: SoCal
Posts: 19,825
EricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by gorrilla View Post
i know, i think ive read that......

i was thinking treads becuase i felt they would give the most stable platform on a slick surface

really its either that or wheels, and i dont think they would make the entire floor HDPE.........
Ah, stability? Again, not determined by surface area. It's determined by some other things, like CG and wheelbase.

Let's say you have a rectangular robot at max dimensions, with the wheels (or treads) a little bit inside the max. It looks like this:
_________________
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||

That's the wheelbase as seen from the top. As long as you keep your CG above that area, you won't tip. As soon as the CG goes outside that area, you've got a split second to get it back before the big crash. If you have treads, you'll still have the same area.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons

"Rockets are tricky..."--Elon Musk

Reply With Quote
  #28   Spotlight this post!  
Unread 14-12-2008, 21:11
gorrilla's Avatar
gorrilla gorrilla is offline
1557 alumni, 4639 mentor
AKA: adam spears
FRC #4639 (RoboSpartans)
Team Role: Mentor
 
Join Date: Mar 2008
Rookie Year: 2007
Location: Houston
Posts: 958
gorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant futuregorrilla has a brilliant future
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by EricH View Post
Ah, stability? Again, not determined by surface area. It's determined by some other things, like CG and wheelbase.

Let's say you have a rectangular robot at max dimensions, with the wheels (or treads) a little bit inside the max. It looks like this:
_________________
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||

That's the wheelbase as seen from the top. As long as you keep your CG above that area, you won't tip. As soon as the CG goes outside that area, you've got a split second to get it back before the big crash. If you have treads, you'll still have the same area.

ah, wheelbase(couldent think of the word for it) thats what i meant......

i never implied that they were going to be wider than a wheel..............

there like this
http://www.chiefdelphi.com/media/photos/28106

except flat
__________________
Adam Spears



Team 1557 2007-2011 student-Lake County FL

Current Team 4639 mentor- Houston TX

Last edited by gorrilla : 14-12-2008 at 21:23.
Reply With Quote
  #29   Spotlight this post!  
Unread 14-12-2008, 21:39
gblake's Avatar
gblake gblake is online now
6th Gear Developer; Mentor
AKA: Blake Ross
no team (6th Gear)
Team Role: Mentor
 
Join Date: May 2006
Rookie Year: 2006
Location: Virginia
Posts: 1,942
gblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond reputegblake has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by EricH View Post
Ah, stability? Again, not determined by surface area. It's determined by some other things, like CG and wheelbase.

Let's say you have a rectangular robot at max dimensions, with the wheels (or treads) a little bit inside the max. It looks like this:
_________________
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||
||.....................||

That's the wheelbase as seen from the top. As long as you keep your CG above that area, you won't tip. As soon as the CG goes outside that area, you've got a split second to get it back before the big crash. If you have treads, you'll still have the same area.
Erich - Don't forget to remind your audience that inertia exists, and that it makes a moving robot do things that a stationary robot would not (like tip over even if the CoG is within its wheelbase)...
__________________
Blake Ross, For emailing me, in the verizon.net domain, I am blake
VRC Team Mentor, FTC volunteer, 5th Gear Developer, Husband, Father, Triangle Fraternity Alumnus (ky 76), U Ky BSEE, Tau Beta Pi, Eta Kappa Nu, Kentucky Colonel
Words/phrases I avoid: basis, mitigate, leveraging, transitioning, impact (instead of affect/effect), facilitate, programmatic, problematic, issue (instead of problem), latency (instead of delay), dependency (instead of prerequisite), connectivity, usage & utilize (instead of use), downed, functionality, functional, power on, descore, alumni (instead of alumnus/alumna), the enterprise, methodology, nomenclature, form factor (instead of size or shape), competency, modality, provided(with), provision(ing), irregardless/irrespective, signage, colorized, pulsating, ideate
Reply With Quote
  #30   Spotlight this post!  
Unread 14-12-2008, 21:59
EricH's Avatar
EricH EricH is offline
New year, new team
FRC #1197 (Torbots)
Team Role: Engineer
 
Join Date: Jan 2005
Rookie Year: 2003
Location: SoCal
Posts: 19,825
EricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond reputeEricH has a reputation beyond repute
Re: HDPE or ICE FLOOR

Quote:
Originally Posted by gblake View Post
Erich - Don't forget to remind your audience that inertia exists, and that it makes a moving robot do things that a stationary robot would not (like tip over even if the CoG is within its wheelbase)...
Oh, Newton's first law?

That is true, especially if there's a sudden stop or change of angle involved. See, in physics (and in Statics), you can usually get a really, really good approximation of forces and how they'll react with each other by finding the CG and having all the forces act from that, unless you're dead sure that the force acts elsewhere (like friction, which gets as close as it can to the floor, or an impact from another robot, which should be within the bumper zone).

If you've got a robot traveling at constant speed, the only forces acting on it are weight, the normal force (cancels out the weight), friction (applied to the wheels) and whatever force you need to maintain equilibrium (applied to the wheels). Now, a sudden stop! The force needed to maintain equilibrium has been effectively distributed through the robot, and there is a sudden forward force at the CG (for simplicity--there's a rule saying I can move it there, I just forget which one) and a reverse force on the lower section of the frame. This creates a moment, causing the robot to rotate forwards. If a corrective force is not applied, the robot continues to rotate and goes splat. This effect is not helped if the CG is high, as there is now a much bigger "lever" for the forward force to act on, and it takes much more force to stop due to the way moment is calculated.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons

"Rockets are tricky..."--Elon Musk

Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ice Ice Baby! Ian Curtis NASA Discussion 2 20-06-2008 00:15
UnEven Floor??? sgsdragons Technical Discussion 18 23-01-2006 18:52
Static on the HDPE Al Skierkiewicz Technical Discussion 60 12-03-2003 17:52
Hdpe Tempest Kit & Additional Hardware 1 02-02-2003 17:47
Friction Between Bins & HDPE Gary Bonner Technical Discussion 2 14-01-2003 08:56


All times are GMT -5. The time now is 21:41.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi