|
Re: Holy long cable batman!
Posted by Joe Ross at 1/31/2001 5:47 PM EST
Engineer on team #330, Beach Bot, from Hope Chapel Academy and NASA/JPL , J&F Machine, and Raytheon.
In Reply to: Holy long cable batman!
Posted by control guy on 1/31/2001 5:40 PM EST:
: What are you guys trying to do? Give the alliance member at the far end of the bench one of your joysticks to control?
We have 5 LEDs that need to be controlled which means that we have to plug our project box into ports 1&3 because they are the only ones with LED drivers (4 each).
We also need 9 switch inputs. Joystick ports 1 & 3 only give 4 each because the other pins are used for the LED drivers. We are also using 2 joysticks for driving. this means that we need to use a custom cable to get the extra switch input, and I would rather use 2 off the shelf cables than try to fabricate a single custom cable with wires going everywhere.
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|